Toilet problems are a nuisance, but in many cases, they’re a minor nuisance that don’t require the help of a plumber. In fact, many Stuart toilet problems are easy to fix. The majority of toilet problems individuals encounter originate in the tank (the upper part of the toilet that holds the water that gets released whenever you flush).
Inside the tank are valves and the handle used for flushing. When these components fail or don’t work efficiently, they can cause a variety of problems. At Cooke’s Plumbing & Septic Services, we have seen a lot of toilets and can tell you right away that the following issues don’t require a plumber.
However, if you’re unable to fix the job on your own, our trained professionals will be happy to help. Now let’s check out the most common toilet problems and how to fix them.
Have you ever heard your toilet refilling as though it has been recently flushed, yet no one is in the bathroom? We call that “the phantom flush.” This is caused by a slow leak from the tank into the toilet bowl. The next time you hear this, here’s what you have to do: drain both the tank and the bowl, then clean the flapper seat, also known as the flush valve. This is the plug that falls against the drain hole on the bottom of the tank. It holds the water until your next flush. Replace the flapper if it’s worn or damaged.
Loose Flush Handle
Another common problem is a loose or disconnected flush handle. If your flush handle isn’t properly connected to the tank, you can reconnect the lift chain that connects the lift arm from the flapper. If you aren’t sure what the lift arm is, that’s the component that connects the flush handle to the lift chain.
Bowl Empties Slowly
A bowl that empties slowly is known as a weak flush. It is usually caused by a clogged hole beneath the rim of the bowl, which needs to be cleaned. You can do this by getting a coat hanger and sticking it into each flush hole to clear out whatever is causing the clog. While you’re clearing the flush hole of debris, make sure you do not scratch the bowl.
Perhaps the most common of all toilet problems in Stuart is the infamous clogged toilet. The first method you can try is to go inside the tank and slightly lift the flapper valve to allow water into the bowl. With any luck, you will see water going down. It’s advised that you surround the base of the toilet with towels because flushing a clogged toilet can flood your bathroom floor.
If the first method does not work, you can always fix your clogged toilet the old-fashioned way: with a plunger. It’s advised to purchase a specialized toilet plunger with an extension flange on the rubber end to unclog the toilet more effectively. It’s also a good idea to wear a pair of rubber gloves – water is likely to splash all over the place. Plunge vigorously until you clear the clog. For more stubborn clogs, you may need a toilet snake.
Toilet Problems that Require a Plumber
While many Stuart toilet problems have easy fixes, there are some issues that are best left to the professionals. Fortunately, if you live in Stuart or Port St. Lucie, you can contact Cooke’s Plumbing & Septic Services to get the job done quickly and efficiently. The following are toilet problems that you should not attempt to repair on your own.
- Cracks – If you notice water leaking around the base of the toilet, you may have a crack in the bowl or tank.
- Sewage backups – If your toilet is overflowing and there is no clog, this is likely a sewage backup, which requires advanced tools and training to repair.
- Constant running – If your toilet is constantly running, this can cost you a tiny fortune. If you cannot spot the problem, contact a plumber.
If you are experiencing severe Stuart toilet problems, contact Cooke’s Plumbing & Septic Services today.